Filter
Top Products
184
CHAPTER 4 MENUS
■ Setting of CPU Information
- Setup CPU information - IRQ and ICR
Figure 4.5-10 CPU Information setup Dialog (IPQ and ICR)
- Relationship between Vector and ICR
The correspondence between external interrupts (Vector) and the interrupt control register (ICR)
varies with the target MCU.
This correspondence is specified by the simulator debugger.
- Setting Correspondence between External Interrupts and ICRs
Set the interrupt control registers (ICRs) corresponding to vector numbers. When a vector number
is selected and the [Change] button is clicked, the dialog shown in Figure 4.5-11 opens.
Figure 4.5-11 Correspondence between External Interrupts and ICRs