Filter
Top Products
200
CHAPTER 4 MENUS
- Control of Default Option File (-Xdof)
- Entry Point (-e)
- Warning Level (-w)(Level 0 to 2)
- Other Option
Entry Point is the address to be set in the PC when data is loaded by the debugger. Be sure to specify this
option with a global symbol.
Select Warning Level from the drop-down list.
In [Other Option], all assembler options can be written like startup options from command lines. Write the
options that do not belong to any assembler option setup categories directly in [Other Option].
■ Setting disposition/connection
See Section 4.5.5.6 Section Disposition/Connection Specifying.
■ Setting symbol definition
Figure 4.5-27 Symbol Definition Setup Dialog Box
If there are two or more items to be set, the symbol found in some item is grayed.
1. Select the [Define Symbol] category
The symbol definition setup dialog box shown in Figure 4.5-27 opens.
2. Specify a symbol name.
3. Specify a setting value.
4. Click the [Set] button.