Filter
Top Products
162
CHAPTER 4 MENUS
4.4.12 Coverage
"Coverage" displays the Coverage Window.
■ Coverage Window
The window displaying the coverage measurement result is opened for setting the coverage and displaying
the total coverage rate.
This window can be used only for the debug session for the MB2141 (emulator).
■ Coverage setup
Select [Setup] from the shortcut menu of the Coverage Window.
Figure 4.4-27 Coverage Setup Dialog
- State Select [Enable] or [Disable].
- Area list Set [Attribute] and [Area].
To delete an area, click the [Delete] button.
To set an area automatically after the load module file has been read, click [Default].