Filter
Top Products
189
CHAPTER 4 MENUS
5. To set the specified macro name as an undefine (-U) option, reset the check mark of the macro name
from [Macro Name List].
Note:
When "undefine" is set, both the define and undefine options are output for the same macro name.
This causes no problem because the undefine option precedes the define option.
■ Resetting a macro name
1. Select the [Define Macro] category.
The macro name setup dialog box shown in Figure 4.5-16 .
2. Select the macro name to reset from [Macro Name List].
3. Click the [Delete] button.
■ Setting an include path
Figure 4.5-17 Include Path Setup Dialog
1. Select the [Include Path] category.
The include path setup dialog shown in Figure 4.5-17 opens.
2. Specify the include path.
Clicking the [Brows..."] button to the right of the input field enables directory selection.
3. Click the [Add] button.