Filter
Top Products
64
CHAPTER 3 Windows
- Edit
Opens the edit window to modify the current source file.
See Section 3.6 Edit Window (Standard Editor).
- Find
Find the current source file for a character string. Perform this operation in the following procedure:
1. Click the right button of the mouse in the Source Window to display the shortcut menu, then select
[Find] from the menu.
The search dialog box shown in Figure 3.7-2 opens.
2. Set the character string you want to find.
3. Set a find direction.
4. If necessary, display a check mark to the left of [Distinguish Uppercase from Lowercase].
5. Click the [Find Next] button.
The fond character string is displayed in reverse video.
6. To terminate search, click the [Cancel] button.
Figure 3.7-2 Find Dialog Box in Source Window
- Jump
Specifies where in the source window the source program is to be displayed. Perform this operation in
the following procedure:
1. Click the right button of the mouse in the Source Window to display the shortcut menu, then select
[Jump] from the menu. See Section 4.3.6 Jump.
2. Select a specification format.
3. Specify a cursor display position.
4. Click the [OK] button.
- Watch
Specifies the variable to watch and opens the watch window. Perform this operation in the following
procedure:
1. Click the right button of the mouse in the Source Window to display the shortcut menu, then select
[Watch] from the menu. See Section 4.4.7 Watch.
2. Specify a variable name.
3. Select a [mode] as required.
4. Click the [OK] button.