Filter
Top Products
140
CHAPTER 4 MENUS
Figure 4.4-5 Search Dialog
-Start Address
Specifies start address of search range
-End Address
Specifies end address of search range
-Type
Selects data type (Byte/Word/Long/Ascii)
-Find Data
Specifies matching data type.
When ASCII is selected as the data type, specify a character string. To search for several data items
continuously when the data type is not ASCII, write each item, delimited by a comma (,).
-Skip Data Count
To search the search range continuously, set 1. When a value greater than or equal to 2 is set as the skip
byte count, addresses are skipped for each set count and the search range is searched.
■ Special operation
To fill memory with data or to copy data to memory, start debugging, click the right mouse button in the
Memory Window to display the menu, then select [Special Operation] from the menu. The memory
operation dialog opens.
Clicking the [OK] button from this dialog starts the function of the open tab.