Filter
Top Products
212
CHAPTER 4 MENUS
4.5.5.8 Setting Converter Options
This section explains how to set converter options.
■ Setting converter options
1. Click the [Converter] tab from the project setup dialog box.
2. To start the load module converter, mark the [Start load module converter] checkbox.
3. Select a conversion format. (Motorola S format/Intel Hex format/Intel Extend Hex format)
4. Set the following items as required:
- The start message is output
- Debug information is output
The macro description can be used to describe options. For the macro description, refer to Section 1.11in
SOFTUNE WORKBENCH Function Manual.
Figure 4.5-37 Converter Option Setup Dialog Box