Filter
Top Products
73
CHAPTER 3 Windows
3.11 Memory Window
The Memory Window is used to display and modify memory data at the specified
address. This window opens only when SOFTUNE WORKBNCH is in the debug
session.
■ Memory Window
Figure 3.11-1 is an example of the Memory Window. When debugging, the Memory Window is displayed
the memory values. Memory values can be directly rewritten.
To modify by specifying the expression and symbol in the memory values, select [Display Setup] from the
shortcut menu for the Memory Window.
Figure 3.11-1 Example of Memory Window
■ Shortcut Menu
- Compare See Section 4.4.5 Memory.
- Find See Section 4.4.5 Memory.
- Special See Section 4.4.5 Memory.
- Inline Assemble See Section 4.4.3 Assembly.
- Jump See Section 4.3.6 Jump.
- Edit See Section 4.4.5 Memory.
- Setup See Section 4.4.5 Memory.
- Break See Section 4.6.4 Break Point.
- Event See Section 4.6.5 Event.
- Watch See Section 4.4.7 Watch.
- Monitoring Switches whether to enable or disable monitoring.
- Close Closes the Memory Window.
Data display section.
Displayed data can be
directly modified.
Characters (e.g., control codes)
other than ASCII characters are
all represented in ’.’.
Column title. This
line is not scrolled.