Filter
Top Products
207
CHAPTER 4 MENUS
-sc sec1+sec2=H'1000
-sc sec3+sec4=H'F000
[Example 2] When the sec4 allocation order is changed as follows:
sec1=H'1000
sec2
sec4
sec3=H'F000
The following sections are generated:
- sc sec1+sec2+sec4=H'1000
-sc sec3 =H'F000
■ Defining the ROM/RAM area
1. Click the [Add] button.
The Set ROM/RAM Area Name dialog Figure 4.5-33 .
Figure 4.5-33 Setup Disposition / Connection Dialog
2. Specify a ROM/RAM area name.
Specify the ROM/RAM name that differs from the set names.
3. Select ROM or RAM as [Area Attribute].
4. Specify a start address and end address (starting address and end address of ROM/RAM area).
5. Click the [Set] button.
The specified ROM/RAM area is registered in [ROM/RAM Area List].
In [ROM/RAM Area List], ROM/RAM areas are sorted and displayed in the start address order.