Filter
Top Products
260
CHAPTER 4 MENUS
4.7.2.2 Interrupt
This section explains the interrupt setup procedure.
■ Setting an interrupt
1. When the interrupt setup dialog box shown in Figure 4.7-8 opens, set an interrupt number.
2. Select an issuance timing.
[One Time] or [Interval] can be selected.
3. Set the interrupt cycle count.
4. Click the [Add] button.
The set interrupt number, issuance timing, and interrupt cycle count are displayed in [Interrupt List].
5. When setting all the items is completed, click the [Close] button.
■ Resetting an interrupt
1. When the interrupt setup dialog box shown in Figure 4.7-8 opens, set an interrupt number.
2. Select the interrupt to be reset from [Interrupt List].
3. Click the [Delete] button.
4. When resetting all the selected interrupts is completed, click the [Close] button.
Figure 4.7-8 Interrupt Setup Dialog Box