Filter
Top Products
68
CHAPTER 3 Windows
3.9 Disassemble Window
The Disassemble window displays the result obtained by executing disassembling at
the specified address. This window is displayed only when SOFTUNE WORKBENCH is
in the debug session.
■ Disassemble Window
Example the Disassemble Window displays at Figure 3.9-1 .
■ Function
- Breakpoint setting/releasing
A breakpoint can be set or released by left-clicking '=>❍' of '❍' of at the left edge of the Disassemble
Window.
- Instruction execution at specified line (address)
An instruction can be executed at the specified line (address) by left-clicking of '=>❍' of '❍' at the left edge
of the Disassemble Window. Step execution (step/into) is also enabled by clicking the left mouse button at
the PC location.
Figure 3.9-1 Disassemble Window
The position of the
current instruction
pointer is displayed.
The position at which
the breakpoint is set is
displayed.
An address is displayed.
A machine code is
displayed.
A mnemonic is
displayed.
An operand is
displayed.