Filter
Top Products
201
CHAPTER 4 MENUS
■ Resetting symbol definition
1. Select the [Define Symbol] category.
The symbol definition setup dialog box shown in Figure 4.5-27 opens.
2. Select the symbol name you want to reset from [Symbol Name List].
3. Click the [Delete] button.
■ Selecting output file
Figure 4.5-28 Output List Setup Dialog Box
1. Select the [Output List] category.
The list output setup dialog box shown in Figure 4.5-28 opens.
2. Set check marks to the left of the list(s) to be created.
- Creates a link map list file
- Creates a external symbol mutual reference information list
- Creates a local symbol list
- Creates a section details map list
When none of the above lists is output, no other item need to be set from the list output setup dialog
box. Execute Step (3) and after only when outputting any of the lists.
3. Check [Output memory usage information list] as needed.
4. Set a check mark to the left of [A long name is not omitted] as required.
Even names exceeding one list file line are fully output.
5. Specify whether to suppress page change. When a check mark is set to the left of [Control of changing