Filter
Top Products
203
CHAPTER 4 MENUS
■ Setting of Options for Library Control
Figure 4.5-30 Library Control Setup Dialog Box
■ Setting when the default library is not used
1. Select the [Control Library] category.
The library control setup dialog box shown in Figure 4.5-30 opens.
2. Set a check mark to the left of [Don't retrieve the default library].
■ Setting method when debug information existence check for library file module is
inhibited
1. Select the [Control Library] category.
The library control setup dialog box shown in Figure 4.5-30 opens.
2. Set a check mark to the left of [Don't check debug information existence in library].
■ Setting a library retrieval path
1. Select the [Control Library] category.
The library control setup dialog box shown in Figure 4.5-30 opens.
2. Set [Search Path].
Clicking the [Browse] button to the right of the input file enables path reference.
3. Click the [Add] button.
The set library retrieval path is added to the end of [Search Path List].