Filter
Top Products
204
CHAPTER 4 MENUS
■ Resetting a library retrieval path
1. Select the [Control Library] category.
The library control setup dialog box shown in Figure 4.5-30 opens.
2. Select the path you want to reset from [Search Path List].
3. Click the [Delete] button.
■ Changing the library retrieval path retrieval order
Library retrieval paths are retrieved in turn from top of [Search Path List]. The order in which library
retrieval paths are registered in the list can be changed in the following procedure:
1. Select the [Control Library] category.
The library control setup dialog box shown in Figure 4.5-30 opens.
2. Select the library retrieval path whose order is to be changed from [Search Path List].
3. Click the [Up] or [Down] button to move the cursor to a relevant position.
■ Setting register bank
Figure 4.5-31 Resister Bank Setup Dialog Box
1. Select the [Register Bank] category.
The register bank setting dialog is displayed (Figure 4.5-31 ).
2. Set the check mark for the register bank list to be used.