Filter
Top Products
87
CHAPTER 3 Windows
3.17 Coverage Window
The Coverage Window displays the coverage measurement result. This window is
displayed only when SOFTUNE WORKBENCH is in the debug session.
■ Coverage Window
Figure 3.17-1 is an example of the Coverage Window. The Coverage Window displays the coverage
measurement result at debugging. This window is displayed only in MB2141 (emulator).
For details on the coverage function, see Section 4.4.12 Coverage.
Figure 3.17-1 Coverage Window (16-Address Unit)
Figure 3.17-2 Coverage Window (1-Address Unit)
Count of access
. : Unaccessed
1 to F : Accessed count of in 16 addresses
* : All 16 addresses were accessed.
Measured address Coverage rate
Display tab. This
line is not scrolled.
Count of access
. : unaccessed
- : addressed
Measured address Coverage rate
Display tab. This
line is not scrolled.