Fujitsu CM25-00322-1E Saw User Manual


 
195
CHAPTER 4 MENUS
- Control of default option file (-Xdof)
- Warning Level (-w) (Level 0 to 3)
Select Warning Level from the drop-down list.
In [Other Option], all assembler options can be written like startup options from command lines. Write the
options that do not belong to any assembler option setup categories directly in [Other Option].
Setting a macro name
Figure 4.5-22 Macro Name Setup Dialog Box
If there are two or more items to be set, the symbol found in some item is grayed.
1. Select the [Define Macro] category.
The macro name setup dialog box shown in Figure 4.5-16 opens.
2. Specify a macro name.
3. Specify a setting value as required.
4. Click the [Set] button.
The specified macro name is set as a define (-D) option.
5. To set the specified macro name as an undefine (-U) option, reset the check mark of the macro name in
[Macro Name List].
Note:
When "undefine" is set, both the define and undefine options are output for the same macro name.
This causes no problem because the undefine option precedes the define option.