Filter
Top Products
202
CHAPTER 4 MENUS
page], page change is suppressed.
When page change is suppressed, the line count cannot be set.
6. Set line count and column count to the right of [Line] and [Column] as required.
■ Setting absolute format assemble list options
Figure 4.5-29 Absolute Format Assemble List Dialog Box
1. Select the [Absolute Assemble List] category.
The absolute format assemble list setup dialog box shown in Figure 4.5-29 opens.
2. Set a check mark to the left of [Creates an absolute assemble list].
When the absolute format assemble list is not output, no other item need to be set from the absolute
format assemble list setup dialog box. Execute Step (3) and after only when outputting the absolute
format assemble list.
3. Select the module to which the absolute format assemble list is to be output from [Output File Name
List], then set a check mark to the left of the selected module.
4. Select the module to which the ROM/RAM/ARRAY list is to be output from [ROM/RAM/ARRAY
List], then set a check mark to the left of the selected module.
5. Select Display Position of Symbol and Address from the drop-down list.
(In Order 'Address' to 'Symbol' / In Order 'Symbol' to 'Address')