Filter
Top Products
139
CHAPTER 4 MENUS
4.4.5 Memory
"Memory" displays the Memory Window.
■ Displaying memory data
When the Memory Window is opened, memory data dump is displayed, starting from the specified address.
Memory data can be also modified using the shortcut menu.
This function (command) can be used only when SOFTUNE WORKBENCH is in the debug session.
- When the Memory Window has been already opened
The Memory Window is activated.
- When the Memory Window is not opened.
The dialog for specifying the display start address (Figure 4.4-4 ) opens.
Figure 4.4-4 Dialog for Specifying Display Start Address
- Type (Line number/Address/Frame)
Specify the type of display position.
- Position
Display disassembling from the position specified in the above type.
■ Changing memory data
Memory data can be changed by rewriting the displayed dump value directly. When a character string is
entered from the ASCII character string display field, the ASCII code of each character is set automatically
in the corresponding address.
The address where the memory dump is to be started can be changed by changing the address field display.
■ Searching memory data
Click the right mouse button in the Memory Window to display the shortcut menu, then select [Search]
from the menu.
The search dialog shown in Figure 4.4-5 opens.