Fujitsu CM25-00322-1E Saw User Manual


 
150
CHAPTER 4 MENUS
4.4.8 Trace
"Trace" displays the Trace Window.
Trace
This function retroactively displays addresses and instructions executed so far. [Enable] can be switched to
[Disable] or vice versa during debugging. Display per machine instruction, cycle display, display per
source can be selected as trace result display.
Refresh
The Trace Window display is not refreshed in real-time according as debugging progresses. Consequently,
to display the latest trace, click the right mouse button in the Trace Window to display the shortcut menu,
then select [Refresh] from the menu.
Buffer size
Trace data is buffered in the trace buffer. The trace buffer becomes full some time during debugging
because its size is finite. When the trace buffer becomes full, the program being executed can be stopped.
Trace setup
Select [Setup] from the shortcut menu.