Filter
Top Products
77
CHAPTER 3 Windows
3.14 Trace Window
This section explains the Trace Window. This window is displayed only when
SOFTUNE WORKBENCH is in the debug session.
■ Trace Window
The Trace Window displays the trace result. For the trace function, see Section 4.4.8 Trace. Figure 3.14-1
is an example of the Trace Window
Figure 3.14-1 Example of Trace Window
■ Shortcut Menu
- Refresh Refresh Trace Window.
- Jump See Section 4.3.6 Jump.
- Back Trace See Section 4.4.8 Trace.
- Instruction Displays trace result in instruction mode (Valid when the emulator debugger is
used).
- Cycle Displays trace result in cycle mode (Valid when the emulator or simulator
debugger is used).
- Source Displays trace result in source mode (Valid when the emulator or simulator
debugger is used).
- Setup See Section 4.4.8 Trace.
- Find See Section 4.4.8 Trace.
- Save Saves Trace data.
- Clear Clears trace buffer.
- Close Closes Trace Window.
- Instruction/cycle/source
1. Click the right button of the mouse to display the shortcut menu.
Column title. This line
is not scrolled.