Filter
Top Products
121
CHAPTER 4 MENUS
4.3.6 Jump
"Jump" moves the cursor to any line in the text file being edited. When SOFTUNE
WORKBENCH is in the debug session, this function (command) specifies the display
start position of a source line, disassemble, memory, or trace coverage.
■ Edit window
When the jump dialog box shown in Figure 4.3-4 opens, specify a jump destination line number. When the
edit window is active, the cursor in the edit window jumps to the specified line irrespective of whether
SOFTUNE WORKBENCH is in the debug session.
Figure 4.3-4 Jump Dialog Box (Edit)
■ Debug session
If a window other than the edit window becomes active when SOFTUNE WORKBENCH is in the debug
session, the dialog box shown in Figure 4.3-5 opens. Select [TYPE], then specify [POSITION] in the
selected format.
The following can be selected as [TYPE].
-Line number
-Address
-Frame
Figure 4.3-5 Jump Dialog Box (Debug)