Filter
Top Products
199
CHAPTER 4 MENUS
4.5.5.5 Setting Linker Options
This section explains how to set linker options.
■ Setting linker options
1. Click the [Linker] tab from the project setup dialog box.
2. Select category.
[General], [Allocation/Link], [Define Symbol], [List Output], [Absolute Assemble List] [Control
Library], or [Register Bank] can be selected as category.
Specified options can be checked using [Option] at the bottom of the dialog.
The macro description can be used to describe options. For the macro description, refer to Section 1.11
in SOFTUNE WORKBENCH Function Manual.
■ Setting [General] options
Figure 4.5-26 General Option Setup Dialog Box
The following options can be set from the general option setup dialog box.
- Outputs start message (-V)
- Outputs debug information (-g)