Filter
Top Products
210
CHAPTER 4 MENUS
4.5.5.7 Setting Librarian Options
This section explains how to set librarian options.
■ Setting librarian options
1. Click [Librarian] from the project setup dialog box.
2. Select category.
[General] or [Output List] can be selected as category.
The specified options are displayed in the lower part of the project setup dialog box.
■ Setting Options in [General]
Figure 4.5-35 Librarian Option Setup Dialog Box (General)
The following options can be set:
- Output start message (-v)
- Output debug information (-g)
- Disable default option (-Xdof)