Filter
Top Products
183
CHAPTER 4 MENUS
4.5.5.2 MCU
This section explains the items that can be set MCU in the [Set Project] dialog.
■ Setting of MCU
1. Click the [MCU] tab in the [Set Project] dialog.
2. Set the following items as needed: [Chip Classification], [Target MCU], [Set CPU information], [MCU
Change].
Figure 4.5-9 Setup Project Dialog-MCU
- Chip Classification
Selects the type of chip.
- Target MCU
Select the target MCU of the chip type selected in [Chip Classification].
- Set CPU Information
The Set CPU Information dialog is opened.
- MCU Change
Open MCU Change dialog box.