Filter
Top Products
185
CHAPTER 4 MENUS
- Setup CPU Information - Internal RAM Area
Figure 4.5-12 CPU Information Setup Dialog (Internal RAM Area)
- Start Address
Sets start address of internal RAM area.
- End Address
Sets end address of internal RAM area.
- Setup CPU Information - Standby Control Register
Figure 4.5-13 CPU Information Setup Dialog (Standby Control Resister)
- Address
Sets STBYC address.
■ Setting of MCU change dialog box
1. Click [MCU change] button.
The MCU change dialog box shown in Figure 4.5-10 opens.
2. From [Current file], choose the CPU information to be used. If a CPU information file to be used is not
found, add it with the [Add] button for [CPU information file list].
The MCU list for the selected CPU information file appears in [Chip] and [Target MCU].