Filter
Top Products
7. System Configuration
Start up
1. Click on the or toggle button of the Window Input Box to either activate or disable the Alpha
blending operation. (image 7-41, image 7-42)
Note: a. Alpha Blending not available with Digitizer D310 with or without Windowing Option.
b. Alpha Blending with a Digitizer D320 available for all inputs.
Image 7-41
Alpha Blending input window
Image 7-42
Status
indicates Alpha blending status active
indicates Alpha blending status disabled.
Alpha Value
The lower the value the image is solid.
0 = solid image (opaque)
255 = transparent or invisible
Move the slider bar to change the transparency.
Apply changes
Click on to store any change and activate any action performed.
Click on
to exit without s
toring any changes performed.
7.3.15 Update All
When using this button ?
As long as XLite toolse
t has the control of the wall, all settings will be saved in preset and update all is not
necessary.
When another application will take control after setup of the wall with XLite Toolset, then the latest settings
should be communicated to this other application. So, when pressing Update All, the actual settings will
be saved in the configuration file. The other application will use this configuration file to control the wall.
Image 7-43
Update all
112 R5976380 XLITE TOOLSET 16/03/2005