Filter
Top Products
5. Wall Positioning Page
5.2.3 Define the Tile Linkage
Start
This refers to the data link orientation. Select the start corner of the data cable while viewing the screen
from the front. This is the location of the first tile (the tile that is connected directly to the Digitizer or
FiberLink RX) in the display.
Possible positions :
• Bottom left
• Bottom right
•Topleft
• Top right
Image 5-6
Direction
Direction specifies how the tiles of the LED wall are linked together.image 5-6
Select the data link direction, either horizontally or vertically, according to the data cabling path. It is
recommended that this is normally done horizontally to make possible trouble shooting more easy.
The dark-orange field in the GUI corresponds with the start point of the data linkage.
When Include is checked, the first tile is incorporated.
Tile Addressing
Individual addresses are given in accordance to the sequence in which devices are detected during the
Auto Detection procedure. Hence addresses start with the digitizer and follow the data cabling path to
sequential address all other devices. It is not possible to manipulate the addresse
s manually.
5.2.4 Wall Positioning for DLite, SLite, OLite and ILite walls
Start
Give up the coordinates in pixels for the horizontal and vertical start pos
ition of the upper left corner of the
wall.
Normal values are :
• Horizontal = 52
•Vertical=36
34
R5976380 XLITE TOOLSET 16/03/2005