Filter
Top Products
19. SLite Display Configuration
19.2 Screen settings
Overview
•Overview
• OSD functions
• Tile Settings
19.2.1 Overview
Type
The type of the LED wall is indicated, SLite.
Measurement System
Type of measurement during manufacturing
Contrast
The light output of the screen in Nit value dependent on the wall type.
To change the contrast:
• Move the slide bar with the mouse. The value in the next to the slide bar will be adapted. or
Click in the digit window next to the slide bar and change the value by direct entering via the keyboard.
- SLiteDisplay:0to5000Nit
Flicker Adjustment
Master clock set up depending on the frame rate.
When clicking on 50Hz or 60Hz, the default value will be filled in. This default value depends on the wall
type.
Display Type
SLite10
50Hz
Ma-clock
121
PWM
6
60Hz
Ma-clock
60
PWM
6
SLite14
121 6 60 6
Another value can be entered by clicking in the digit area and entering the desired value with the keyboard.
Mode
Mode can be Internal or External.
Internal internal test pattern will be displayed.
Thecolorcanbeselected(R–G–B).
External
images from a digitizer will be displayed.
Color selection is grayed out.
Resolution mode
For SLite displays, the ’Resolution mode’ can be set on Real or Virtual.
Real
one pixels contains 5 LEDs (2 red, 2 green and 1 blue).
Virtual
one pixels contains 3 LEDs (1 red, 1 green and a common blue)
242
R5976380 XLITE TOOLSET 16/03/2005