Filter
Top Products
14. FiberLink Configuration
The Receiver Controls tab appears if a FiberLink Receiver is selected at the top. In this tab, one can
adjust some receiver controls in the event of lesser transmission quality. One can switch on three filters:
the Horizontal Reconstruction Filter, the Vertical Reconstruction Filter and the Data Enable Reconstruction
Filter.
14.5 Key Reference
Status
One can also choose between Synthesized or Transmitted Key Reference. In case the original or Trans-
mitted Key Reference gets lost, a Synthesized Key Reference can be used to improve transmission quality.
14.6 LED Wall Power
Status
“Power off” shuts down the LEDwall and pushing the same button - now with the text “Power ON” - restarts
the LEDwall.
14.7 Device Properties FiberLink
Overview
This box contains a FiberLink Transmit tab and a FiberLink Receive
tab.
Provided are the corresponding read only information such as address, serial number, software version,
andruntimeintheFiberLinkInfotab.
R5976380 XLITE TOOLSET 16/03/2005
209