Filter
Top Products
20. OLite Display Configuration
Image 20-8
OLite tile settings page
Available Tile Settings
PWM Repeat
MAclock
Mode : this can be switched between internal and external.
internal
internal test pattern will be displayed on that specific tile.
external
external source for digitizer will be displayed on that specific tile.
Tile Cutout, start and size
Digital
Contrast per color
Measurement System: calibration system per tile, normal calibration or multi-calibration.
OLite LED
modules: The different chains are indicated. Click on View Modules to get an overview. (see
"View properties modules", page 257)
Device P
roperties
These are the device properties of the control unit.
Address The tiles address, each tile is addressed individually
Serial number The tiles serial number, each tile has its own Serial Number.
Runtime The tiles time in use.
PCB Identification The version of controller printed circuit board used.
Software
Identification
The version of embedded software a tile uses.
Firmware
Identification
The version of Firmware a tile uses.
256
R5976380 XLITE TOOLSET 16/03/2005