Filter
Top Products
15. FiberLink 2 configuration
15. FIBERLINK 2 CONFIGURATION
Overview
•Startup
• FiberLink 2 Selection
• Pattern Generator
•LEDWallPower
• Device Properties FiberLink
15.1 Start up
Overview
The FiberLink 2 is a digital fiber optic transmission system from Digitizer to D/I/S/OLite and MiPIX Disp
lay.
It covers very long distances and has a very high bandwidth (1.5 GB/s). This enables the end-user for in-
stance to setup the Digitizer in a remote control room. The FiberLink 2 transmits not only the video signals
but also the communication to the display. Therefore an extensive self-diagnose syst
em is implemented
for possible failure of transmission.
Start up
1. Click on the FiberLink 2 icon .
The FiberLink 2 configuration window will reveal. (image 15-1)
Image 15-1
FiberLink2 settings window
R5976380 XLITE TOOLSET 16/03/2005 211