Filter
Top Products
11. D320L Configuration
Image 11-15
Test pattern generator window
11.2.4.2 Test pattern set up
How to configure a test pattern
1. Click on of the 6 available patterns.
The name of the selected pattern will be displayed in the box Current pattern. (image 11-16)
Depending on the selected pattern, an extra input box appears.
Pattern Extra input box
Bytelevel
Amplitude: the amplitude (brightness) of the pattern.
Crosshatch Pixelwidth: the width of the pixels (lines). Value between 1 and 4.
HRamp no extra input box
Multiburst
Type: type of the multiburst pattern (width of the pixels). Can be a value between
0 and 7.
Blocks no extra input box
VRamp no extra input box
2. Select the color that will be used to generate the pattern.
The following options are possible:
-Red
-Green
-Blue
- Yellow(R+G)
-Cyan(G+B)
- Magenta (R + B)
- White(R+G+B)
- Loop all
Select ‘LOOP ALL’ to loop through all the available colors.
168
R5976380 XLITE TOOLSET 16/03/2005