Filter
Top Products
10. D320PL Configuration
Image 10-13
Selecting a preset timing
10.2.4.2 Using the advanced timing settings for digital or analog output
How to select
1. Select first a predefined setting, see "Using predefined timings for digital or analog output", page 149.
2. Click on
.
The timings menu expands. (image 10-14)
Different timing settings are available for:
Analog output
Sync generator and display interface timings are available
Digital output
Only sync generator timings are available
3. Click on
next to Sync Generator.
The Sync Generator timing window reveals. (image 10-15)
For more explanation see "Timings of Sync Generator for Digital or Analog output", page 152.
4. Click on next Display Interface.
The Display Interface timings window reveals. (image 10-16)
For more explanation see "Timings of Sync Generator for Digital or Analog output", page 152
5. Check Frame Rate Conversion when you are working with CRT projectors.
When checked, it generates a continuous sync with delay.
This Frame Rate Conversion option exclude the Lock on HSync.
6. Check Lock on HSync in all other cases, especially when working with moving images.
When checked, it generates discontinued sync with minimal delay. It avoids shaking images.
This Lock on HSync option exclude the Frame Rate Conversion.
7. Horizontal sync polarity can be positive or negative. The position depends on the display.
8. Vertical sync polarity can be positive or negative. The position depends on the display.
9. You have checked Lock on input ?
If yes, then adapt the frame delay
in lines until the full image is displayed.
150
R5976380 XLITE TOOLSET 16/03/2005