Filter
Top Products
23. Maintenance Page
Image 23-30
Calibration level
23.3.2.7 Run mode LED wall
How to set the run mode
1. Click on the drop down box next to RunmodeLEDwa
ll and select the desired setting.
See image 23-31.
exter-
nal
external source will be used to calibrate the projector
internal internal test pattern will be displayed on the wall.
When all 3 colors are checked, a white test pattern will be displayed.
When one of the colors is selected, the corresponding test pattern will be displayed.
R5976380 XLITE TOOLSET 16/03/2005
287