Filter
Top Products
5. Wall Positioning Page
Image 5-18
Wall positioning page for manual positioning for MiPix
5.3.2 Selection mode
Possibility
T
ile selection can be done on a single base or on a multiple base. When multiple tile (strings for MiPix)
selection is done, moving the tiles at once are possible.
Set up of the selection mode
1. Click on the drop down box just below Selection mode. (image 5-19)
Th
e drop down box opens. Single or Multiple are possible.
2. Select the desired mode.
Image 5-19
Se
lection mode
How to make a multiple selection
1. If the tiles (strings for MiPix) you want to select are just below each other in the Module list, push the
Shift button and click with your mouse on the first and a last one in the desired selection. (image 5-20)
Th
e selected tiles (strings for MiPix) become orange.
2. If the tiles (strings for MiPix) you want to select are not below each other in the Module list, push the
CTRL button and click with your mouse on each tile (string for MiPix) you want to select. (image 5-21)
The selected tiles (strings for MiPix) become orange.
R5976380 XLITE TOOLSET 16/03/2005
43