Filter
Top Products
9. D320 Configuration
4 Height active pixels
5 Total number of pixels in line
6 Total number of lines in field
7Activearea
9.2.2.2 Timings of Sync Generator
Mode
The pixel clock can work in 2 ways: single or dual path. This toggle button makes it possible to change
the clock mode.
Working in dual path doubles the pixel clock speed.
Horizontal Start Active Pixels
The horizontal start position of the active image area, referenced from HSync. The val
ue must be greater
than Hsync Width.
Image 9-8
Width active pixels
The number of pixels that are really used (= the actual width of the image/video that will be shown).
Vertical Start Active Pixels
The vertical start position of the active image area, referenced from VSync. The value must be greater
than Vsync Width.
Height active pixels
The number of lines that are really used (= actual height of the image/video that will be shown).
Total number of pixels in line.
The total number of pixels in a line (= max. width).
total= (hor. Start active pixels) + (width active pixels) + (number of trailing blanking pixels).
Total number of lines in field.
The total number of lines in a field (= max height).
total=(vert. Start active pixels) + (height active pixels) + (number of trailing blanking lines)
Pixel Clock (kHz)
The clock speed of the digitizer. Typically, this will be 32 MHz (in single mode)
HSyncWidth
The width of the horizontal sync signal. This should always be 10 pixels.
VSyncWidth
The width of the vertical sync signal. This should al
ways be 10 pixels.
138
R5976380 XLITE TOOLSET 16/03/2005