Filter
Top Products
5. Wall Positioning Page
A popup window appears. (image 5-61)
2. Select View and move your mouse to the right.
3. Select Show wiring.
When checked, the blocks will be connected with a line in the same way as the blocks should be hard-
ware connected. The start block, block connected with the controller unit, has a colored background.
(image 5-62)
As this function is a toggle function, the show wiring stays active until it is switched off again.
Image 5-61
Show wiring
Image 5-62
Show wire direction, result
5.4.6.11 Show rotation
What is possible ?
To check the rotation of each block on an easy way, with show rotation pixel 1 and 3 of each block will
light up.
Howtoshowtherotation?
1. Right click in the workspace.
A popup window appears. (image 5-63)
2. Select View and move your mouse to the right.
3. Select Show rotation.
Pixel 1 and 3 will light up of each block simultaneously. (image 5-64)
Image 5-63
Show rotation
R5976380 XLITE TOOLSET 16/03/2005 69