Filter
Top Products
4. Autodetect Page
4. AUTODETECT PAGE
Overview
• Autodetect page startup
• RS232 Communication Settings
• Start Autodectection
• Reload parameters from devices
• Serial Numbers
4.1 Autodetect page startup
Start up
1. Click on Autodetect.
Note: Autodetection must be done on each occasion after logging on.
This window is used for the primary detection of devices connected to the local PC.
During autodetection, all devices will be addressed in the order in which they are detected in the data
link. (image 4-1)
Image 4-1
Autodetect start up page
R5976380 XLITE TOOLSET 16/03/2005 21