Filter
Top Products
6. Stack Manager
6. STACK MANAGER
Overview
• Basic principle of stacking
• Restrictions on stacking
• Before using the Stack manager
• Stack overview
• Start up of the Stack Manager
• Building the layout of the display
• Creatinganextradisplay
• Assigning screens to a display
• Removing a display
• Changing the properties of an existing display
• Layout screens
• Changing the position of a display
• Timings Overview master Digitizer
• Zoom/pan in the screen representation pane
• Reloading a configuration
• Show or Hide Apply Settings
• Adjustment Apply Level Settings
6.1 Basic principle of stacking
Stack
A stack is configuration in which several digitizers are connected with each other through the
stack connector. This configuration makes it possible to create big images.
Screen
A screen is the output of one digitizer.
Display
A display is a group of screens which are combined together by stacking the respective digi-
tizers.
General overview
When a display is too large to be controlled by a single digitizer, this display can be split up in different
screens, each controlled by a digitizer which is responsible for a part of the complete image. This principle
is called stacking.
R5976380 XLITE TOOLSET 16/03/2005
73