Filter
Top Products
16. DLite Display Configuration
Displaying the tile properties
1. Click on one of the rectangular orange area, to open the Tile properties page.
This page mainly consist of read-only properties, except for the Mode (internal/external), which can be
switched.
All indicated values are tile specific. (image 16-4)
Image 16-4
Tile settings window
Available Tile Settings
PWM Repeat
PWM peak
Mode : this can be switched between internal and external.
internal
internal test pattern will be displayed on that specific tile.
external
external source for digitizer will be displayed on that specific tile.
Tile Cutout
Analogue Contrast
Digital Contrast
Measurement System: calibration system per tile, normal calibration or multi-calibration.
Chroma Measurements: Chroma measurement overview per tile.
Temporary Correction: Color overview per tile which can be edit temporary.
Device Properties
Address The tiles address, each tile is addressed individually
Serial numbe
r
The tiles ser
ial number, each tile has its own Serial Number.
Runtime The tiles time
in use.
PCB Identification The version of controller printed circuit board used.
218
R5976380 XLITE TOOLSET 16/03/2005