Filter
Top Products
11. D320L Configuration
11.2.3 Monitor preview of an image on the LED wall
Overview
• Introduction and Start up
• Moving the monitor preview in the active area
• Settings
11.2.3.1 Introduction and Start up
When possible
A monitor preview is only possible when the digitizer is connected to a Barco LED wall via a split cable.
Cable to be used : Z3499213
For DLite, SLite
Z3499213
For ILite Z3499211
The content of the LED wall becomes visible on the monitor screen. The window view can be moved over
thecompleteactiveareaoftheLEDwa
ll.
How starting up
1. Click on the red monitor icon next to Monitor preview.
The Panning control window opens. (image 11-11)
The green dotted line indicates the active area on the led wall.
The colored area indicates the effective view on the monitor.
Image 11-11
Panning con
trol
11.2.3.2 Moving th
e monitor preview in the active area
Moving via de mouse
1. Move your mouse in the colored area.
The cursor becomes a four arrow mouse. (image 11-12)
R5976380 XLITE TOOLSET 16/03/2005 165