Filter
Top Products
10. D320PL Configuration
The following choices are possible:
Adjust the number of lines per
field
The processor will calculate the timings on Master digitizer.
When the calculated value of the number of lines is lower than
the active lines, an alert box will be displayed to try it via the
Adjust the number of pixels per line method.
Adjust the number of pixels per
line
The processor will calculate the timings on Master digitizer.
When the calculated value of the number of pixels per lines is
lower than the active number of pixels per line, an alert box will be
displayed to try it via the Adjust number of lines per field method.
When both methods give a alert box, it is not possible to lock on the selected source.
The Timings given in the New timings on Master Digitizer are given as information.
4. Click OK to continue.
Image 10-19
Timings LED wall
Image 10-20
Lockmode window
10.2.4.6 Timings of Sync Generator for Barco LED Wall output selected
How to select
As this is the same procedure as for a D320, for more info see chapter "9. D320 Configuration", "Sync
Generator", page 136.
156
R5976380 XLITE TOOLSET 16/03/2005