Filter
Top Products
14. FiberLink Configuration
14.2 FiberLink Selection
How to select
1. Click on the drop down box next to Selection.
2. Select the FiberLink you want to set up.
14.3 Pattern Generator
Overview
Status transmitter : On/Off
Status receiver : On/Off
Possibilities for the transmitter:
• Multiburst: Type0to7
•Hramp
•Vramp
• Crosshatch : Width of pattern in pixels (pixelwidth 1 to 4)
• Byte level: amplitude of byte level
Possibilities for the receiver:
• Multiburst: Type0to7
•Hramp
•Vramp
• Crosshatch : Width of pattern in pixels (pixelwidth 1 to 4)
• Byte level: amplitude of byte level
Possibilities for Color Transmitter & Receiver:
•Red
•Green
•Blue
•All
Possibilities for Motion Transmitter & Receiver:
• Vertical : up/down
• Horizontal : left/right
14.4 Reconstruction Filter
Horizontal
The horizontal sync is reconstructed at receiver side through a reconstruction al
gorithm. This is useful
when signal deterioration (e.g. bad cable quality) occurs.
Vertical
The vertical sync is reconstructed at receiver side through a reconstruction algorithm. This is useful when
signal deterioration (e.g. bad cable quality) occurs.
Data Enable
The Data enable is reconstructed at receiver side through a reconstruction
algorithm. This is useful when
signal deterioration (e.g. bad cable quality) occurs.
208
R5976380 XLITE TOOLSET 16/03/2005