Filter
Top Products
23. Maintenance Page
Image 23-27
Moving a color end point
Via the coordinates
1. Click on color point to select.
2. Click on the ’+’ or ’-’ key to change the value for x and y.
Or,
click on the input field and enter the desired value with your keyboard.
23.3.2.4 Color temperature (white point)
Color temperature via color temperature tra
ject curve
1. Check off the check box in front of Use colortemp. traject (1). (image 23-28)
2. Click on the white point to select.
3. Hold down the left mouse button and move the point to the desired value along the curve (2).
Or,
click in the White coordinate field and change the coordinates by clicking on the + or - button (4)
Or,
by clicking in the input fields and entering the desired value with the keyboard.
Or,
click on the slider button and move to the right or left until the white point is on the desired position (5)
284
R5976380 XLITE TOOLSET 16/03/2005