Filter
Top Products
13. Input Slots for D320 series
SXGA 60Hz
SXGA 75Hz
SXGA 85Hz
UXGA 60Hz
VCO Range
This setting will automatically set when the ’
Resolution source’ setting is entered.
15 - 30 MHz
30 - 60 MHz
60 - 120 MHz
110 - 140 MHz
VCO Gain
Default value will be filled in. Change this value to a higher or lower value to improve the image.
50
100
150
250
350
500
750
1500
Total Pixels/Line
Default value. Fine adjustment of the image possible by changing the value up or down. Change by one
digit up or down and look to the result before changing more.
Changing the PLL divider, changes the horizontal sync value.
13.8.4 RGB Contrast
Changing the contrast
Utilize the sliders to determine a good color balance between Red, Green & Blue . Each has a range
between 0 and 255
13.8.5 RGB Brightness
Changing the Brightness
Utilize the sliders to determine a good brightness between Red, Green & Blue. Each has a range between
0 and 126.
198
R5976380 XLITE TOOLSET 16/03/2005