Filter
Top Products
23. Maintenance Page
Image 23-9
OLite soft/firmware update
The following software can be upgraded:
• Program software
•Firmware
How to execute?
The procedure is the same for all for.
1. Enter the new version number (e.g. 2.1) next to the box ’N
ew version’ (The current version is indicated
next to the box ’Current version’).
Note: only the version number is required. The system itself selects the correct file and installs the new
software.
2. Is the update for the complete range?
If yes, Only ’Common update’ should be checked.
All control units will be updated in parallel.
If no, Indicate the range in the device boxes and de-select ’Common update’.
Note: By default the complete range will be indicated in the
device range boxes.
Only the selected range will be update but one after each other.
23.2.5 SLite Display
Overview
The following popup window appears for a SLite display
272 R5976380 XLITE TOOLSET 16/03/2005