Filter
Top Products
18. ILite MD Display Configuration
18.2 Screen Settings
Overview
•Overview
• OSD functions
• Tile Settings
18.2.1 Overview
Type
The type of the MD display is indicated, ILite MD.
Measurement System
Type of measurement during manufacturing
Contrast
The light output of the screen in Nit value dependent on the wall type.
To change the contrast:
• Move the slide bar with the mouse. The value in the next to the slide bar will be adapted. or
Click in the digit window next to the slide bar and change the value by direct entering via the keyboard.
- ILite Display : 0 to 1500 Nit
Contrast on RGB
Click on the RGB in the contrast selection. The slider changes to 3 sliders, one for each color.
The contrast can be adjusted for each color separately.
Image 18-2
RGB contrast settings
Flicker Adjustment
Master clock set up depending on the frame rate.
When clicking on 50Hz or 60Hz, the default value will be filled in. This default value depends on the wall
type.
Display Type 50Hz
Ma-clock
60Hz
Ma-clock
ILite6 MD 47 37
ILite8 MD 61 51
ILite10 MD 94 78
ILite12MD 138 115
Another value can be entered by clicking in the digit area and entering the desired value with the keyboard.
234
R5976380 XLITE TOOLSET 16/03/2005