Filter
Top Products
6. Stack Manager
Horizontal timings
Start Horizontal start active pixels, the horizontal start position of the active image area,
referenced from HSync. The value must be greater than HSync Width.
Active
Width active pixels, the number of pixels that are really used (= the actual width of the
image/video that will be
shown
Total
Total number of pixels in line (= max. width)
total = (hor. start active pixels) + (width active pixels) + (number of trailing blanking pixels)
Vertical timings
Start Vertical start active pixels, the vertical start position of the active image area, referenced
from VSync. The value must be greater than VSync Width.
Active
Height active pixels, the number of pixels that are really used (= the actual height of the
image/video that will be shown
Total
Total number of pixels in field (= max. height)
total = (vert. start active pixels) + (height active pixels) + (number of trailing blanking lines)
Frame rate
Indication of the vertical frequency.
Frequencies
Dual path
The pixel clock can work in 2 ways: single or dual. Check this box if you want to work
in dual mode.
Pixel
clock
The clock speed of the digitizer. Typically 32 MHz in single mode.
H-sync
The width of the horizontal sync signal. This should always be 10 pixels.
V-sync
The width of the vertical sync signal. This should always be 10 pixels.
6.13.4 Overview of the Timings for Digital output
Overview
The timings overview are the seem as for LED wall output mode. For a detailed explanation, see "Overview
of the Timings for LED Wall output", page 88.
R5976380 XLITE TOOLSET 16/03/2005
89