Filter
Top Products
10. D320PL Configuration
10.2.3 Monitor Preview of an image on a LED wall
Overview
• Introduction and Start up
• Moving the monitor preview in the active area
• Settings
10.2.3.1 Introduction and Start up
When possible
A monitor preview is only possible when the digitizer is connected to a Barco LED wall via a split cable.
Cable to be used : Z3499213
For DLite, SLite
Z3499213
For ILite Z3499211
The content of the LED wall becomes visible on the monitor screen. The window view can be moved over
thecompleteactiveareaoftheLEDwa
ll.
How starting up
1. When in LED WALL mode, click on the red monitor icon next to Barco LED Wall.
The Panning control window opens. (image 10-9)
The green dotted line indicates the active area on the led wall.
The colored area indicates the effective view on the monitor.
Image 10-9
Panning con
trol
10.2.3.2 Moving th
e monitor preview in the active area
Moving via de mouse
1. Move your mouse in the colored area.
The cursor becomes a four arrow mouse. (image 10-10)
R5976380 XLITE TOOLSET 16/03/2005 147