Filter
Top Products
1. Introduction
1. INTRODUCTION
1.1 General introduction
Overview
The display and configuration ‘’Xlite ToolSet Software’’ is designed preliminary as a user interface (GUI).
This software works in combination with the existing :
• Barco Digitizers D310
• Barco Digitizers D320 series
• Barco DLite, ILite and SLite Displays
• Barco MiPix Displays
• FiberLink
• AEC
• Barco projectors (D320PL)
Windows is the operating environment (Windows NT/2000) for the software.
The "Xlite ToolSet Software" is a DHTML based application and runs out of Microsoft Internet Explorer 5.
5
or later. The software is divided in six main work sections, after logging on.
The Control Software can be used to control and configure of Barco ILite Systems, SLite Systems, DLite
Systems or MiPix systems, either locally or via a network. (LAN, WAN or internet).
Connection Configurations
When connected through a serial RS232 connection.
RS232
PC
D/ILite Display
Client +
WebServer +
Local Server
Digitizer
310/320
Image 1-1
Configuration with client & server on one PC
Connection configurations can be achieved directly from a PC to a Digitizer or via a PC connected to an
local Server on a local area network (LAN). With the Digitizer connected to the local server.
R5976380 XLITE TOOLSET 16/03/2005
9